Tango 20AIP67 GPS & GLONASS Puck Antenna

The Tango 20A is a GPS & GLONASS dual system antenna. It comes with a rubber seal gasket for IP67 rated weatherproof protection and is well suited to outdoor environments.

The antenna is supported by the LNA which has a 28dB gain to uplift the dielectric antenna signal. Common applications are commercial vehicle roofs, and exterior vending machines where the screw mount allows the antenna to be fixed in place.

Supplied as standard with 3m of cabe and SMA Male connector. Alternative cable lengths or connector types can be specified for volume orders.

Key Features

  • GPS & GLONASS
  • Rubber seal gasket
  • 28dB LNA Gain
  • Vandal Resistant
  • Compact Size

Electrical Specifications – Dielectric Antenna

  • Frequency: 1575-1615 MHz
  • Impedance: 50 Ohm
  • Polarization: RHCP
  • Gain: 2dBi (Zenith)
  • VSWR: <1.5
  • Axial Ratio: 3dB (Max)

Electrical Specifications – GPS Antenna

  • Gain: 28dB
  • Noise Figure: <1.5
  • Filter Insertion Loss: <3 dB
  • Ex-band Attenuation:
    •  35 dB@CF + 50 MHz
    • 50 dB@CF -100 MHz
  • VSWR: <2.0
  • Supply Voltage: 2.2 – 5V DC
  • Current Consumption: 16 – 32mA

Mechanical Specifications

  • Dimensions: Ø 46.6 x H14.5mm
  • GPS Connector: SMA Male
  • Material: ABS
  • Cable: RG174
  • Mounting Method: Adhesive

Environmental Specifications

  • Operating Temperature: -40 to +85°C
  • Relative Humidity: Up to 95%

Product Features
GPS
Position
IP
67
IP
68
Omni
directional
TANGO
thread

Product Compliance
RoHS
Compliant
REACH
Compliant
TSCA
Assessed
CMRT
Aligned
Anti
Slavery

Datasheets

Tango 20A IP67 Test Certificate
Tango 20A Datasheet

Additional Resources

Antenna Fact Sheet
Understanding Antenna Theory
Antenna 2D Radiation Plot Guide
Visual Guide to Radiation Plots
IP Rating Guide

Ordering Information

Siretta Part Number: TANGO20A/3M/SMAM/S/S/26
Description: GPS & GLONASS Puck Antenna 3m Cable SMA Male Connector

Request For Quote

Alternative cable lengths and connector types can be specified for volume orders.